| |
Home
About Us
Links
Contact Us
Products
Natural Stone
Glass & Ceramic
Accents
Services
Installation
Repairs
Custom Design
Care & Maintenance
Photo Gallery
Ideas & Samples
Lance Campbell
CA Lic. No. 871436
(805) 478-5778
Email
|
Porcelain & Ceramic
For light cleaning, follow these typical steps:
- Remove loose dirt with a vacuum cleaner or a broom
- Mix a small amount of cleaner (i.e. Mr. Clean, Spic 'n Span, or Lysol) with warm water
- Using a cotton mop, sponge, or other soft apparatus, clean the floor, then thoroughly rinse with clean
water, and allow to dry.
Note: Rinsing is very important, since dried detergent not only dulls the finish, but can trap abrasive dirt particles.
Also, if your tile has a polished finish, you should dry it with a soft towel to prevent water spots.
For heavily soiled floors, let the cleaning mixture soak into the dirt for 5-10 minutes before mopping or scrubbing. Clean
small areas at a time and do not let the cleaning solution dry on the tile. Be sure to rinse the area thoroughly before
cleaning another. More difficult dirt and stains may require scrubbing with a nylon pad or brush.
To reduce the likelihood of stains and heavy soil buildup, follow these simple steps:
- Clean up spills immediately
- Place dirt-catching mats at every room entrance
- Routinely sweep and mop
|
